6 versions of the 80 series. …Who better than us?
The SR 7008 is equipped with the innovative “NON-STOP” system with torque limiter which, perfectly calibrated, allows the power supply to be temporarily interrupted automatically in the event of overloads.
Once the overload condition is resolved, without any intervention by the operator, the torque limiter retransmits motion to the feeder.
The SR 7008 also adopts a pre-chamber system that allows for well-formed bales with uniform density even in the case of small windrows.
The pick-up, 195 cm wide on the SR 7008 and 220 cm on the SR 7008 STAR, is equipped with a freewheel and two torque limiters on the augers to prevent breakages due to overloads. The STAR version can also be equipped with a "short hay plate with accelerator roller" to facilitate the collection of short products.
After the pick-up is the pick-up system. Feeding:
- The rotary feeder with two comb reels conveys the product from the collector to the pre-chamber;
- The feeding fork, synchronized with the rotary feeder and the compression piston, feeds the pre-chamber in a continuous cycle;
- When the pre-chamber is full, mechanical sensors trigger a mechanism that causes the feeding fork to complete the feeding cycle.
To protect the machine from overload, in addition to the torque limiters, there are two safety bolts: one on the flywheel and one on the knotters. In the event of the latter breaking, a safety device protects the needles by stopping the piston stroke.
The machine is equipped with four Rasspee knotters and two cleaning fans.
The "AUTOSTART" control unit (optional) allows you to program the fan pause time via the control unit in the cab.
The machine is equipped with the Easy Tronic electronic control unit, which, installed in the cab, allows you to adjust the bale density and displays the binding, any twine breakage, bale unloading (both with the chute and stacker), and the partial and total bale counter.
There are numerous accessories available, such as the humidity sensor located in the baling chamber; automatic greasing of all points requiring lubrication; chain lubrication; the last bale ejector; and the mounted bale stacker (which allows two bales to be grouped together to halve harvesting time in the field).
All models are equipped with an independent hydraulic system as standard. Only a single action is needed to raise and lower the pickup.
The upward opening of the front and side hoods facilitates maintenance operations and replenishing twine spools.
